P+F傳感器安全光束系列*的詳細資料：

控制單元和單光束SL或SLA12/29系列的安全傳感器一起組成一個保護模塊系統。

SC2/SC4提供了傳感器所需的電源，發射器的觸發，接收器接收信號的分析。相應安全等級的控制信號（通過兩個繼電器的強制觸點）可以有效的輸出。依賴于所使用的安全光電傳感器，這個系統的檢測范圍可達65 m。

可選的功能，如繼電器監控和啟動/重啟互鎖，可以確保安全功能能被可靠的執行。使用者可以根據現場應用的需要選擇這些操作模式。

P+F傳感器應用：

對不斷增加的危險部位的常規應用：

• 對操作點或“壓力點”危險部位的人身保護
• 對進入危險區域的人或機器進行偵測
• 經常用來替代鋪在地面上的壓力傳感器，用于監控需要保護的區域，監測是否有人員或機器的闖入。

倍加福SC2/SC4是1根或2根安全光束傳感器（包括發射器和接收器）的控制單元，*符合EN 954-1或IEC 61496的2級或4級標準。安全盒系統安全盒可以實現讓所有的機器保護系統都連接到一個控制單元上。由于它的模塊化設計，使得它能滿足各種廣泛的應用。

安全盒系統可以很好的和滿足EN 954-1標準1到4級的安全光電傳感器，機械安全系統和安全開關相連。

系統經過了的標準認證：IEC 61496-1和EN 61508 （SIL3）。可以和眾多的安全傳感器相連，同時也提供了緊急停止功能，支持等級0和1，以及具有多種muting模式。安全盒具有IP20的防護等級，專為開關柜安裝設計。

每個安全盒包括了一個牢固的底座，可以安裝2到8個附加模塊。這個底座用于機械和電氣的連接，同時為每個獨立的模塊提供電源。

P+F傳感器模塊型號包括：

• OSSD模塊（輸出信號開關設備）
• 4通道CPU模塊（4CP, 4XP, 4CG, 4XG）
• 支持4或6通道的傳感器模塊卡
• Muting模塊
• E-stop模塊
• 空槽蓋板

安全盒可以連接的光柵和光幕：

• 電氣感應保護設備（ESPE）
• 急停按鈕
• 位置開關
• 開關墊和開關面板
• 磁性開關
• 門接觸器和其它1或2通道的安全元件。

倍加福安全光束傳感器介紹：

產品	簡介
Safety control unit module SB4 Module 4CG	Sensor module, 4 sensor channels, Single module for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices （emergency off）, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Number of channels: 4
Safety control unit module SB4 Module 4CP/165	Sensor module, 4 sensor channels, Single module for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices （emergency off）, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Number of channels: 4
Safety control unit module SB4 Module 4XG/165	Sensor module, 4 sensor channels, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Connection of a number of separate de-energising circuits, Number of channels: 4
Safety control unit SC2-2 24VDC	Evaluation device for safety thru-beam sensors SL12 and SL29, Test input （Type 2 according to IEC/EN 61496-1）, Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Number of channels: 2
Safety light grid with integrated control unit SLC-3/133	ATEX-approval for zone 2 and zone 22, Sensing range up to 20 m, Beam spacing 400 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Safety outputs OSSD, external status displays OSSD, Effective detection range: 0.2 ... 20 m, Connection: M20 cable gland , Cable diameter ∅5.5 ... 13 mm , terminal compartment with screw terminals, lead cross-section max. 1.5 mm2 , Number of beams: 3, Beam spacing: 400 mm
Safety light grid with integrated control unit SLPC10-4	Sensing range up to 10 m, 4-radial design, Beam spacing 300 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter, Number of beams: 4, Beam spacing: 300 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 separated fail safe semiconductor outputs
Safety light grid with integrated control unit SLPC10-4/31	Sensing range up to 10 m, 4-radial design, Beam spacing 300 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter, Number of beams: 4, Beam spacing: 300 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 relay outputs, force-guided NO-contact
Safety light grid with integrated control unit SLPC8-2/31	Sensing range up to 8 m, 2-radial design, Beam spacing 500 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Minimum wiring expense due to transceiver with passive mirror column, Effective detection range: 0.2 ... 8 m, Connection: M16 cable gland , terminal compartment with cage-terminals, Number of beams: 2, Beam spacing: 500 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 relay outputs, force-guided NO-contact
Safety light grid with integrated control unit SLPCM10-2-L/31	Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage terminals, M12 connector for transmitters, muting lamp, etc., muting sensors, lamp socket for muting lamp, etc., Number of beams: 2, Beam spacing: 500 mm, Operating mode: Start/restart disable, relay monitor, muting operating modes
Evaluation unit SLVA-4Kplus 115VAC-RI	Self-monitoring （type 4 according to IEC/EN 61496-1）, Evaluation device for safety thru-beam sensors SLA, for safety light grids SLP and for 2 channel safety devices （emergency off）, Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Number of channels: 4

 此產品信息版權歸上海維特銳所有，如想詳細了解請點擊：P+F傳感器